JUKI KE-3020V User Manual

Rev. 2.0
Maintenance Guide
1-5
1-1-3. Replacing the YR-Motor
<M and L board specifications>
1) Remove the SL3061232TN to detach the COVER_FBR.
2) Remove the SL6041092TN, NM3060810SF to detach the SUB_COVER_FUR.
3) Loosen the COUPLING_Y_screw (do not remove the screw at this time) and disconnect the
connector of the SERVO MOTOR 1500W cable.
4) Remove the SL6082002TN and replace the SERVO MOTOR 1500W.
5) Reassemble the components in the reverse order of disassembly.
∗ The clearance between the COUPLING and motor is 4 mm. The tightening torque of the
COUPLING_Y_screw is 7 N⋅m. (Figure 1-1-3-4)
Figure 1-1-3-1 Removal of Cover of Machine with M and L Board Specifications
SL3061232TN (
×
2)
SL6041092TN (×4)
SL3061232TN (×2)
NM3060810SF
View of A
View of B
SUB_COVER_FUR
COVER_FBR
B A
COUPLING_Y_screw
COUPLING_Y
Figure 1-1-3-2
4
Figure 1-1-3-3
SERVO MOTOR 1500W
SM6082002TN (
×
4)
Figure 1-1-3-4

JUKI KE-3020V Specifications

General

Brand	JUKI
Model	KE-3020V
Category	Industrial Equipment
Language	English