Juniper CTP Series User Manual

CHAPTER 3
Activating, Disabling, Deleting, or
Recentering CTP Bundles
•
Activating, Disabling, Deleting, or Recentering CTP Bundles (CTPView) on page 137
•
Activating, Disabling, Deleting, or Recentering for CTP Bundles (CTP Menu) on page 137
Activating, Disabling, Deleting, or Recentering CTP Bundles (CTPView)
This topic describes how to change the status of bundles. You can recenter only active
CTP and SAToP bundles.
Before you begin:
•
Log in to the CTPView software at least at the Net_Admin level.
•
Connect the CTPView server to the CTP device for which you want to change the status
of the bundles.
To change the status of bundles:
1. In the side pane, select Bundle > Change Status.
2. Select the appropriate boxes and click Submit.
Activating, Disabling, Deleting, or Recentering for CTP Bundles (CTP Menu)
You can recenter only active CTP bundles.
To activate, disable, delete, or recenter bundles using the CTP Menu:
1. From the CTP Main Menu, select 1) Bundle Operations.
2. Select the type of bundle.
137Copyright © 2018, Juniper Networks, Inc.

Juniper CTP Series Specifications

General

Brand	Juniper
Model	CTP Series
Category	Server
Language	English