CHAPTER 2
Configuring CTP Bundles
•
Adding a Bundle (CTPView) on page 24
•
Adding a Bundle (CTP Menu) on page 25
•
Configuring IP Parameters for CTP Bundles (CTPView) on page 25
•
Configuring IP Parameters for CTP Bundles (CTP Menu) on page 27
•
Configuring Circuit Startup Parameters for CTP Bundles (CTPView) on page 29
•
Configuring Circuit Startup Parameters for CTP Bundles (CTP Menu) on page 30
•
Configuring the CTP Bundle Data Packet Protocol and OAM Port (CTP Menu) on page 31
•
Ethernet Media Configuration Overview on page 32
•
Displaying Ethernet Media Information (CTP Menu) on page 33
•
Configuring Ethernet Media (CTP Menu) on page 34
•
Configuring the Direction of the Circuit (CTPView) on page 35
•
Configuring the Direction of the Circuit (CTP Menu) on page 36
•
Configuring Virtual IP Parameters for CTP Bundles (CTPView) on page 37
•
Configuring Virtual IP Parameters for CTP Bundles (CTP Menu) on page 38
•
Configuring the Missing Packet Fill Pattern for CTP Bundles (CTPView) on page 39
•
Configuring the Missing Packet Fill Pattern for CTP Bundles (CTP Menu) on page 40
•
Configuring IP Forwarding for CTP Bundles (CTPView) on page 41
•
Configuring IP Forwarding for CTP Bundles (CTP Menu) on page 42
•
Configuring Signaling for CTP Bundles (CTPView) on page 44
•
Configuring Signaling for CTP Bundles (CTP Menu) on page 48
•
Configuring Serial Port Parameters for CTP Bundles (CTPView) on page 52
•
Configuring Serial Port Parameters for CTP Bundles (CTP Menu) on page 54
•
Configuring Transparent Encoding for CTP Bundles (CTPView) on page 58
•
Configuring Transparent Encoding for CTP Bundles (CTP Menu) on page 60
•
Configuring Bundle Pairs for TDM/TDC Operation (CTPView) on page 62
•
Configuring Bundle Pairs for TDM/TDC Operation (CTP Menu) on page 64
•
Configuring T1 and E1 Port Parameters for CTP Bundles (CTPView) on page 66
•
Configuring T1 and E1 Port Parameters for CTP Bundles (CTP Menu) on page 69
23Copyright © 2018, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
