Juniper CTP Series User Manual

CHAPTER 4
Querying CTP Bundles
•
Displaying Running CTP Bundle Configuration, State, and Counters
(CTPView) on page 139
•
Displaying the NetRef Node Synchronization Information (CTP Menu) on page 143
•
Displaying the Running CTP Bundle Configuration, State, and Counters (CTP
Menu) on page 145
Displaying Running CTP Bundle Configuration, State, and Counters (CTPView)
This topic describes how to display the running configuration of your bundle, along with
the state and various counters.
Before you begin:
•
Log in to the CTPView software at least at the Net_Admin level.
•
Connect the CTPView server to the CTP device for which you want to change the status
of the bundles.
To view information about the bundle:
1. In the side pane, select Bundle > Runtime Query.
2. Run your mouse over the MouseOver to Display and Select Bundles to Display bar.
3. In the table of bundles, select the bundles that you want to view, and click Display
Selected Bundles. To select multiple bundles, hold down the CTRL key.
The configuration of the bundle or bundles appears followed by the runtime state
and counters.
Table 57 on page 140 describes the fields in the state and counters sections of the
display.
The signaling configuration appears only if you changed the signaling configuration
from the default configuration.
139Copyright © 2018, Juniper Networks, Inc.

Juniper CTP Series Specifications

General

Brand	Juniper
Model	CTP Series
Category	Server
Language	English