Juniper CTP Series User Manual

Table 7: CTP Bundle IP Parameter Settings in the CTP Menu (continued)
Your ActionFunctionField
Enter a number from 0 through
255.
Specifies the ToS byte to be used in the IP headers of packets sent from
the CTP device to the IP network.
For a mapping of ToS byte values to DSCP classes and settings, see
“Providing QoS for CTP Bundles by Using Service Type Overview” on
page 10.
You do not need to set the ToS value to the same value on local and
remote bundles.
Service Type
Enter a number from 0 through
255.
Specifies the maximum number of router hops that a packet can traverse.
The CTP device sets the TTL value in IP packets that it sends to the IP
network. The IP network does not alter or optimize the packet routing
based on the TTL setting. You do not need to set the same TTL value on
local and remote ports.
Time to Live
Type a description for the bundle.Specifies identifying information about the bundle.
You can use the bundle description as the search criteria when you search
for bundles from the network monitoring page.
Bundle
Description
Related
Documentation
Providing QoS for CTP Bundles by Using Service Type Overview on page 10•
Configuring Circuit Startup Parameters for CTP Bundles (CTPView)
This topic describes how to configure advanced options that are related to circuit startup.
Set these parameters to the same values on the local and remote CTP devices.
Before you begin:
•
Log in to the CTPView software at least at the Net_Admin level.
•
Connect the CTPView server to the CTP device for which you want to configure bundles.
To configure circuit startup parameters for CTP bundles using CTPView:
1. In the side pane, select Bundle > Configuration.
2. Run your mouse over the Display and Select an Existing Bundle bar.
3. In the table of bundles, select the bundle that you want to modify.
4. Under Bundle Options, select Advanced Options Show to display advanced
parameters and configure the parameters as described in Table 8 on page 30.
5. Click Click to Submit Bundle AND Port Changes.
29Copyright © 2018, Juniper Networks, Inc.
Chapter 2: Configuring CTP Bundles

Juniper CTP Series Specifications

General

Brand	Juniper
Model	CTP Series
Category	Server
Language	English