Juniper EX Series User Manual

Table 48: Terms Configuration Parameters (continued)
Your ActionFunctionField
Click Add and select the protocol from the
list.
To remove a protocol, select it and click
Remove.
Specifies the name of the protocol from which the route was
learned or to which the route is being advertised.
Protocol
Click Add. Select the policy from the list.
To remove a policy, select it and click
Remove.
Specifies the name of a policy to evaluate as a subroutine.Policy
Click More for advanced configuration.Specifies advanced configuration options for policies.More
Type the IP address.Specifies the area identifier.OSPF Area ID
Select a value from the list.Specifies the origin of the AS path information.BGP Origin
Type a value.Specifies the BGP local preference.Local Preference
Select External.
Select the OSPF type from the list.
Specifies the type of route.Route
Click Add. Select the AS path from the list.Specifies the name of an AS path regular expression.AS Path
Click Add. Select the community from the
list.
Specifies the name of one or more communities.Community
Destination tab
Select a value from the list.Specifies an address family protocol.Family
Select a value from the list.Specifies a routing instance.Routing Instance
Select a value from the list.Specifies the name of a routing table.RIB
Type a value.Specifies the individual preference value for the route.Preference
Type a value.Specifies a metric value.Metric
To add an interface, select Add > Interface.
Select the interface from the list. For an
EX8200 Virtual Chassis configuration,
select the member, FPC, and the interface
from the list.
To add an address, select Add > Address.
Select the address from the list.
To delete an interface, select it and click
Remove.
Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are
not interface-specific, such as internal BGP (IBGP).
Interface
Copyright © 2017, Juniper Networks, Inc.88
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Juniper EX Series Specifications

General

Brand	Juniper
Model	EX Series
Category	Switch
Language	English