Table 109: Summary of Key CoS Rewrite Rules Output Fields (continued)
Additional InformationValuesField
To display forwarding classes, loss priorities,
and rewritten CoS values, click the plus sign
(+).
Rewrite rule type:
• dscp—For IPv4 DiffServ traffic.
• exp—For MPLS traffic.
• ieee-802.1—For Layer 2 traffic.
• inet-precedence—For IPv4 traffic.
CoS Value Type
Internal index for this particular rewrite rule.Index
Rewrite rules are applied to CoS values in
outgoing packets based on forwarding class
and loss priority setting.
Forwarding class that is used to determine
CoS values for rewriting in combination with
loss priority.
Forwarding Class
Loss priority that is used to determine CoS
values for rewriting in combination with
forwarding class.
Loss Priority
Value that the CoS value is rewritten to.Rewrite CoS Value To
Related
Documentation
Defining CoS Rewrite Rules (CLI Procedure)•
• Defining CoS Rewrite Rules (J-Web Procedure) on page 67
• Example: Configuring CoS on EX Series Switches
Monitoring CoS Scheduler Maps
Purpose NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support Class of
Service (CoS) on EX4600 switches.
Use the monitoring functionality to display assignments of CoS forwarding classes to
schedulers.
Action To monitor CoS scheduler maps in the J-Web interface, select Monitor > Class of Service
> Scheduler Maps.
To monitor CoS scheduler maps in the CLI, enter the following CLI command:
show class-of-service scheduler-map
Meaning Table 110 on page 233 summarizes key output fields for CoS scheduler maps.
Copyright © 2017, Juniper Networks, Inc.232
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
