Release History Table DescriptionRelease
Starting with Junos OS Releases 14.1X53-D10 and 16.1R1, J-Web
monitoring is supported on EX4600 switches and EX4600 switches in
a Virtual Chassis.
14.1X53-D10
Related
Documentation
Configuring a Virtual Chassis on an EX Series Switch (J-Web Procedure) on page 177•
• Verifying the Member ID, Role, and Neighbor Member Connections of a Virtual Chassis
Member
Monitoring 802.1X Authentication
Purpose NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support 802.1X
authentication on EX4600 switches.
Use the monitoring feature to display details of authenticated users and users that failed
authentication.
Action To display authentication details in the J-Web interface, select Monitoring > Security >
802.1X.
To display authentication details in the CLI, enter the following commands:
• show dot1x interface detail | display xml
• show dot1x interface detail <interface> | display xml
• show dot1x auth-failed-users
Meaning The details displayed include:
• A list of authenticated users.
• The number of connected users.
• A list of users that failed authentication.
You can also specify an interface for which the details must be displayed.
Copyright © 2017, Juniper Networks, Inc.236
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
