3. In the Update Junos section, select Local File. The Upload Package section appears
below the Update Junos section.
4. In the Upload Package section, enter information into the fields described in
Table 78 on page 162.
5. Click Upload and Install Package. The software is activated after the switching platform
completes the installation procedure.
Table 114: Upload Package Summary
Your ActionFunctionField
Type the location of the software package, or click
Browse to navigate to the location.
Specifies the location of the software
package.
File to Upload
(required)
Select the check box if you want the switching
platform to reboot automatically when the upgrade
is complete.
Specifies that the switching platform is
automatically rebooted when the upgrade
is complete.
Reboot If Required
Managing Licenses for the EX Series Switch (J-Web Procedure)
NOTE: This topic applies only to the J-Web Application package.
To enable and use some Junos OS features on an EX Series switch, you must purchase,
install, and manage separate software licenses. Each switch requires one license. For a
Virtual Chassis deployment, two licenses are recommended for redundancy. After you
have configured the features, you see a warning message if the switch does not have a
license for the feature.
Before you begin managing licenses, be sure that you have:
•
Obtained the needed licenses. For information about how to purchase software licenses,
contact your Juniper Networks sales representative.
•
Understand what makes up a license key. For more information, see License Key
Components for the EX Series Switch.
This topic includes the following tasks:
•
Adding New Licenses on page 249
•
Deleting Licenses on page 250
•
Displaying License Keys on page 250
•
Downloading Licenses on page 250
Adding New Licenses
To add one or more new license keys on the switch, with the J-Web license manager:
249Copyright © 2017, Juniper Networks, Inc.
Chapter 17: Software, Files, Licenses, Logs
To Next Page
Loading...
Need help?
General
