Juniper EX Series User Manual

1. Select Troubleshoot>Ping Host.
2. Next to Advanced options, click the expand icon.
3. Enter information into the Ping Host page, as described in Table 91 on page 202.
The Remote Host field is the only required field.
4. Click Start.
The results of the ping operation are displayed in the main pane . If no options are
specified, each ping response is in the following format:
bytes bytes from ip-address: icmp_seq=number ttl=number time=time
5. To stop the ping operation before it is complete, click OK.
Meaning Table 91 on page 202 lists the fields.
Table 91: J-Web Ping Host Field Summary
Your ActionFunctionField
Type the hostname or IP address of the host to ping.Identifies the host to ping.Remote Host
Advanced Options
• To suppress the display of the hop hostnames,
select the check box.
• To display the hop hostnames, clear the check
box.
Determines whether to display hostnames of the
hops along the path.
Don't Resolve
Addresses
Select the interface on which ping requests are sent
from the list. If you select any, the ping requests are
sent on all interfaces.
Specifies the interface on which the ping requests
are sent.
Interface
Select the number of ping requests to send from
the list.
Specifies the number of ping requests to send.Count
• To set the DF bit, select the check box.
• To clear the DF bit, clear the check box.
Specifies the Don't Fragment (DF) bit in the IP
header of the ping request packet.
Don't Fragment
• To record and display the path of the packet,
select the check box.
• To suppress the recording and display of the path
of the packet, clear the check box.
Sets the record route option in the IP header of the
ping request packet. The path of the ping request
packet is recorded within the packet and displayed
in the main pane.
Record Route
Select the decimal value of the TOS field from the
list.
Specifies the type-of-service (TOS) value in the IP
header of the ping request packet.
Type-of-Service
Select the routing instance name from the list.Name of the routing instance for the ping attempt.Routing Instance
Copyright © 2017, Juniper Networks, Inc.202
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Juniper EX Series Specifications

General

Brand	Juniper
Model	EX Series
Category	Switch
Language	English