Release History Table DescriptionRelease
For Junos OS Release 14.1X53-D10 and later, EX3300 switches configured
as a Virtual Chassis display the value 1–10 FPC in the Inventory details
field.
14.1X53-D10
In J-Web Application package Release 14.1X53-A2, you can form a Virtual
Chassis using EX4600 and EX4300 switches.
14.1X53-A2
J-Web is supported on EX4600 switches only in J-Web Application
package Release 14.1X53-A2.
14.1X53-A2
Related
Documentation
J-Web User Interface for EX Series Switches Overview on page 3•
• EX2200 Switches Hardware Overview
• EX3200 Switches Hardware Overview
• EX3300 Switches Hardware Overview
• EX4200 Switches Hardware Overview
• EX4300 Switches Hardware Overview
• EX4500 Switches Hardware Overview
• EX6210 Switch Hardware Overview
• EX8208 Switch Hardware Overview
• EX8216 Switch Hardware Overview
• Checking Active Alarms with the J-Web Interface on page 186
• XRE200 External Routing Engine Hardware Guide
Understanding J-Web Configuration Tools
NOTE: This topic applies only to the J-Web Application package.
The J-Web graphical user interface (GUI) enables you to monitor, configure, troubleshoot,
and manage the switching platform by means of a Web browser with Hypertext Transfer
Protocol (HTTP) or HTTP over Secure Sockets Layer (HTTPS) enabled. The J-Web
interface provides access to all the configuration statements supported by the switch.
The J-Web interface provides three methods for configuring the switch:
•
Configure menu
•
Point & Click CLI Editor
•
CLI Editor
Copyright © 2017, Juniper Networks, Inc.28
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
