•
Delete the current rescue configuration—Click Delete rescue configuration.
Related
Documentation
Setting or Deleting the Rescue Configuration (CLI Procedure)•
• Reverting to the Rescue Configuration for the EX Series Switch
• Configuration Files Terms
Uploading a Configuration File (J-Web Procedure)
NOTE: This topic applies only to the J-Web Application package.
You can create a configuration file on your local system, copy the file to the EX Series
switch and then load the file into the CLI. After you have loaded the configuration file,
you can commit it to activate the configuration on the switch. You can also edit the
configuration interactively using the CLI and commit it at a later time.
To upload a configuration file from your local system:
1. Select Maintain > Config Management > Upload.
The work area displays the File to Upload box.
2. Specify the name of the file to upload using one of the following methods:
•
Type the absolute path and filename in the File to Upload box.
•
Click Browse to navigate to the file.
3. Click Upload and Commit to upload and commit the configuration.
The switch checks the configuration for the correct syntax before committing it.
Related
Documentation
Uploading a Configuration File (CLI Procedure)•
• Understanding J-Web Configuration Tools on page 28
• Understanding Configuration Files for EX Series Switches
Managing Log, Temporary, and Crash Files on the Switch (J-Web Procedure)
NOTE: This topic applies only to the J-Web Application package.
167Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Configuration, Files, Users, Licenses, and Product Registration
To Next Page
Loading...
Need help?
General
