Action To view BGP routing information in the J-Web interface, select Monitor > Routing > BGP
Information.
To view BGP routing information in the CLI, enter the following commands:
• show bgp summary
• show bgp neighbor
Meaning Table 98 on page 214 summarizes key output fields in the BGP routing display in the J-Web
interface.
Table 98: Summary of Key BGP Routing Output Fields
Additional InformationValuesField
BGP Peer Summary
Number of BGP groups.Total Groups
Number of BGP peers.Total Peers
Number of unavailable BGP peers.Down Peers
Address of each BGP peer.Unconfigured Peers
RIB Summary tab
Name of the RIB group.RIB Name
Total number of prefixes from the peer, both
active and inactive, that are in the routing table.
Total Prefixes
Number of prefixes received from the EBGP
peers that are active in the routing table.
Active Prefixes
Number of routes received from EBGP peers
currently inactive because of damping or other
reasons.
Suppressed Prefixes
History of the routes received or suppressed.History Prefixes
Number of routes currently inactive because of
damping or other reasons. These routes do not
appear in the forwarding table and are not
exported by routing protocols.
Dumped Prefixes
Number of pending routes.Pending Prefixes
Status of the graceful restart process for this
routing table: BGP restart is complete, BGP
restart in progress, VPN restart in progress, or
VPN restart is complete.
State
Copyright © 2017, Juniper Networks, Inc.214
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
