Table 67: SNMP Configuration Page (continued)
Your ActionFunctionField
Type the hostname of the system.Free-form text string that overrides the system
hostname.
System Override
Name
Communities
To add a community, click Add
Type the name of the community being added.Specifies the name of the SNMP community.Community
Name
Select the authorization (either read-only or
read-write) from the list.
Specifies the type of authorization (either read-only or
read-write) for the SNMP community being configured.
Authorization
Traps
To add a trap group, click Add.
Type the name of the group being added.Specifies the name of the SNMP trap group being
configured.
Trap Group
Name
•
To generate traps for authentication failures,
select Authentication.
•
To generate traps for chassis and environment
notifications, select Chassis.
•
To generate traps for configuration changes,
select Configuration.
•
To generate traps for link-related notifications
(up-down transitions), select Link.
•
To generate traps for remote operation
notifications, select Remote operations.
•
To generate traps for remote network
monitoring (RMON), select RMON alarm.
•
To generate traps for routing protocol
notifications, select Routing.
•
To generate traps on system warm and cold
starts, select Startup.
•
To generate traps on Virtual Router
Redundancy Protocol (VRRP) events (such as
new-master or authentication failures), select
VRRP events.
Specifies which trap categories are added to the trap
group being configured.
Categories
1. Enter the hostname or IP address, in dotted
decimal notation, of the target system to
receive the SNMP traps.
2. Click Add.
Specifies one or more hostnames or IP addresses for
the systems to receive SNMP traps generated by the
trap group being configured.
Targets
Health Monitoring
Copyright © 2017, Juniper Networks, Inc.132
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
