Keithley 3700A Series Reference Manual

Series 3700A System Switch/Multimeter Reference Manual Section 2: Installation
3700AS-901-01 Rev. D/June 2018 2-5
Install the Series 3700A
To install the Series 3700A in the rack:
If the Series 3700A mainframe has more than two plug-in cards installed, you must use the optional
Model 4288-10 Rear Support Mount Kit in a fixed installation.
1. While supporting the Series 3700A, align the mounting holes on the front panel of the Series
3700A with the four cage nuts installed in the front rack rails.
2. Insert the four truss-head screws through the front-panel mounting holes into the cage nuts, and
tighten with a Phillips-head screwdriver.
Figure 6: Install the instrument in the rack

Keithley 3700A Series Specifications

General

Brand	Keithley
Model	3700A Series
Category	Multimeter
Language	English