Keithley 3700A Series Reference Manual

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-362 3700AS-901-01 Rev. D/June 2018
Also see
Slot (on page 9-34)
slot[slot].startchannel.* (on page 11-369)
slot[slot].idn
This attribute returns a string that contains information about the plug-in card.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
idnString = slot[slot].idn
idnString
The return string
slot
Slot number (1 to 6)
Details
The information that is returned depends on whether the plug-in card in the slot is a physical card or
pseudocard.
For physical cards, this returns a comma-separated string that contains the model number,
description, firmware revision, and serial number of the plug-in card installed in the specified slot.
For pseudocards, the response is Pseudo, followed by the model number, description, and ??? for
the firmware revision and serial number.
Example
print(slot[3].idn)
If a 3723 is installed in slot 3, the response is:
3723,Dual 1x30 Reed Multiplexer,01.40e,1243657
Also see
None
slot[slot].interlock.override
This attribute suppresses or permits interlock errors to be generated.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Reset
Recall setup
Create configuration script
Save setup
0
Usage
value = slot[slot].interlock.override
slot[slot].interlock.override = value
value
Indicates the state of the interlock override:
▪ slot.ON (1)
▪ slot.OFF (0)
slot
The slot (1 to 6) containing the card to which the interlock state is applied

Keithley 3700A Series Specifications

General

Brand	Keithley
Model	3700A Series
Category	Multimeter
Language	English