Keithley 3700A Series Reference Manual

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-135
display.loadmenu.delete()
This function removes an entry from the USER TESTS menu, which can be accessed using the LOAD key on the
front panel.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
display.loadmenu.delete("displayName")
displayName
The name to be deleted from the USER TESTS menu
Details
If you delete an entry from the USER TESTS menu, you can no longer run it by pressing the LOAD
key.
Example
display.loadmenu.delete("Test9")
for displayName, code in
display.loadmenu.catalog() do
print(displayName, code)
end
Deletes the entry named “Test9”
Output:
Test DUT1() beeper.beep(2, 500)
Part1 testpart([[Part1]], 5.0)
Also see
display.loadmenu.add() (on page 11-133)
display.loadmenu.catalog() (on page 11-134)
display.locallockout
This attribute describes whether or not the EXIT (LOCAL) key on the instrument front panel is enabled.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Power cycle
Not saved
0 (display.UNLOCK)
Usage
lockout = display.locallockout
display.locallockout = lockout
lockout
0 or display.UNLOCK: Unlocks EXIT (LOCAL) key
1 or display.LOCK: Locks out EXIT (LOCAL) key
Details
Set display.locallockout to display.LOCK to prevent the user from interrupting remote
operation by pressing the EXIT (LOCAL) key.
Set this attribute to display.UNLOCK to allow the EXIT (LOCAL) key to interrupt script or remote
operation.

Keithley 3700A Series Specifications

General

Brand	Keithley
Model	3700A Series
Category	Multimeter
Language	English