15
15-48 bizhub C554/C454/C364/C284/C224
[OHP Interleave]
To display: [Copy] - [Application] - [Tailoring] - [OHP Interleave]
When copying onto multiple transparencies, you can insert the specified paper between the transparencies.
These sheets of paper prevent the transparencies from sticking together due to heat generated during cop-
ying or static electricity.
Tips
- You can only specify [Black] for copying onto transparencies.
- You can only specify 1 for the number of copies. The number value cannot be changed.
- The finishing function cannot be changed.
d Reference
Load transparencies into the Bypass Tray. For details on how to load transparencies, refer to [User's Guide:
Introduction].
NOTICE
Do not use a transparency that has been through the machine even once. Doing so may lead to reduced print
quality, a paper jam, or damage to the machine. Even if a transparency has been discharged without being
printed, it cannot be reused.
Settings Description
[ON]/[OFF] Select [ON] to specify OHP Interleave.
[Interleave Paper] Select the paper tray for the paper to be inserted between transparencies.
The paper size of the transparencies loaded on the Bypass Tray is dis-
played in [Transparency]. Be sure to use the same size for loaded transpar-
encies and the paper to be inserted.
To Next Page
Loading...
Need help?
General
