16
16-6 bizhub C554/C454/C364/C284/C224
[Paper Tray Settings]
To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings]
Specify the settings related to selection and switching of paper trays.
[Auto Tray Selection Settings]
To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Auto Tray Selection Settings]
When you have selected [Auto] in [Paper], select target paper trays for auto tray selection. Also, specify the
priority for the paper trays.
[Auto Tray Switch ON/OFF]
To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Auto Tray Switch ON/OFF]
When printing originals by specifying a paper tray, select whether to allow auto switching (ATS: auto tray
switching) to the paper tray loaded with paper of the same size when the specified tray runs out of paper.
[Restrict] is specified by default.
Settings Description
[Auto Tray Selection Set-
tings]
When you have selected [Auto] in [Paper], select target paper trays for auto
tray selection. Also, specify the priority for the paper trays.
For details, refer to page 16-6.
[Auto Tray Switch ON/OFF] When printing originals by specifying a paper tray, select whether to allow
auto switching (ATS: auto tray switching) to the paper tray loaded with pa-
per of the same size when the specified tray runs out of paper.
For details, refer to page 16-6.
[No Matching Paper in Tray
Setting]
Select the operation to be taken when there is no appropriate sized paper
in the specified paper tray.
For details, refer to page 16-7.
[Print Lists] Specify the default paper tray and printing method (1-sided or 2-sided)
used for printing reports and meter counts.
For details, refer to page 16-7.
[Post Inserter Settings] Specify the type and the size of paper to be loaded into the paper tray for
using Post Inserter.
For details, refer to page 16-7.
Settings Description
[Auto Tray Select] When you have selected [Auto] in [Paper], select target paper trays for auto
tray selection. The machine selects the tray loaded with optimal paper
among the target trays.
The trays loaded with normal paper and special paper for 1-sided printing
are included in the target.
Different default values are available for different options installed on this
machine.
[Tray Priority] Specify the priority for feeding paper among the trays selected in [Auto
Tray Select].
If paper of the same size is loaded in multiple trays, paper is fed from the
tray given higher priority.
Different default values are available for different options installed on this
machine.
[Auto Paper Selection Set-
ting]
If [Auto] is selected for [Paper], you can also specify the trays loaded with
[Thin Paper], [User Paper 1], and [User Paper 2] for target trays. Select tar-
get paper for auto paper selection, and specify the priority order.
For details on User Paper, contact your service representative.
To Next Page
Loading...
Need help?
General
