Konica Minolta bizhub C224 User Manual

7
7-6 bizhub C554/C454/C364/C284/C224
Scanning a number of originals in several batches ([Separate Scan])
If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can
load them in several batches and handle them as one job.
In [Separate Scan], you can switch between the ADF and the Original Glass for scanning the originals.
1 Load the original.
NOTICE
Do not load more than 100 sheets at a time into the original tray, and do not load the sheets up to the
point where the top of the stack is higher than the , mark. Doing so may cause an original paper jam,
damage the originals, and/or load to the ADF failure.
2 Tap [Application] - [No. of Originals] - [Separate Scan], and set to [ON].
3 Press the Start key.
The original is scanned.
4 Load the next original, then press Start key.
% If desired, tap [Change Setting] to change the copy settings according to the new original.
5 Repeat Step 4 until all pages of the original are scanned.

Konica Minolta bizhub C224 Specifications

General

Print Speed	22 ppm (A4)
Duplex Printing	Yes
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Memory (RAM)	2 GB
Type	Color Multifunction Printer
Print Resolution	1200 x 1200 dpi
Paper Capacity	1, 150 sheets (standard)
Connectivity	Ethernet, USB
Functions	Print, Copy, Scan, Fax
Supported Paper Sizes	A3
Hard Drive	250 GB
PDL	PostScript
Max Paper Size	SRA3
Display	9" color touch-screen