bizhub C554/C454/C364/C284/C224 17-9
17
[Weekly Timer ON/OFF Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Weekly Timer Settings] - [Weekly Timer
ON/OFF Settings]
Specify whether to use the weekly timer. Then, select a power save mode for the machine to enter according
to the weekly timer.
[Time Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Weekly Timer Settings] - [Time Settings]
Specify the time for switching to the power save mode ([OFF Time]) and the time for returning to the normal
mode ([ON Time]) for each day of the week.
- [Set All]: Select days of the week and specify times for [ON Time] and [OFF Time] for all the selected
days.
- [Delete]: Deletes the time you have selected by using [ ] or [ ].
[Date Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Weekly Timer Settings] - [Date Settings]
Configure the day to which the weekly timer is applied.
Select the day to which the weekly timer is applied by switching the calendar by [Year] and [Monthly]. Op-
tionally, you can collectively configure the appropriate days for each day of the week with [Daily Setting].
[Date Settings] Configure the day to which the weekly timer is applied.
Select the day to which the weekly timer is applied by switching the calen-
dar by [Year] and [Monthly]. Optionally, you can collectively configure the
appropriate days for each day of the week with [Daily Setting].
For details, refer to page 17-9.
[Select Time for Power
Save]
Specify whether to set a time zone for switching the machine in the normal
mode with the weekly timer enabled temporarily to the sleep mode during
lunch time, for example.
For details, refer to page 17-10.
[Password for Non-Busi-
ness Hours]
Specify whether to restrict the use of this machine in the Power Save mode
by requesting a password.
For details, refer to page 17-10.
[Tracking Function Set-
tings]
Specify whether to use the tracking (learning) function that automatically
sets the weekly timer schedule to fit the operating status of your office.
For details, refer to page 17-10.
[Display ON/OFF Time] Displays the switching times to enter the power save mode ([OFF Time])
and to the normal mode ([ON Time]) set by the tracking function.
For details, refer to page 17-10.
Settings Description
Settings Description
[Yes]/[No] Specify whether to use the weekly timer.
[Yes] is specified by default.
[Power Save Mode Setting] Select a power save mode for the machine to enter according to the weekly
timer.
• [ErP Auto Power OFF]: A mode that provides a higher power saving ef-
fect. In this mode, no job can be received.
• [Sleep]: This mode has a lower power saving effect than the [ErP Auto
Power OFF] mode; however, it allows you to receive print jobs from a
fax machine or computer. The received jobs are printed when the ma-
chine returns to the normal mode.
[Sleep] is specified by default.
To Next Page
Loading...
Need help?
General
