LeCroy WAVESURFER User Manual

WaveSurfer DSO
WS-OM-E Rev B 81
If you need to use a number in your waveform's name, it is recommended that you append
an alpha character at the end of the number : "XYZ32a" for example.
1. If you are saving to file, touch the Data Format field and select a format type from the
pop-up menu:
If you select ASCII or Excel, also touch the SubFormat field and select either Time Data
or Time & Ampl. Then touch the Delimiter field and select a delimiter character from the
pop-up menu: comma, space, semicolon, or tab.
2. Touch the Browse button for the Save file in directory field and browse to the location
where you want the file saved. The file name is assigned automatically and is shown
below the field.
3. Touch
.
Auto Save
You can also enable Auto Save from this dialog by touching one of the Auto Save buttons:
Wrap (old files overwritten)
Fill (no files overwritten)
CAUTION
If you select Fill, you can quickly use up all disk space on your hard disk.
Recalling Waveforms
1. In the menu bar, touch File; then touch Recall Waveform... in the drop-down menu.

LeCroy WAVESURFER Specifications

General

Brand	LeCroy
Model	WAVESURFER
Category	Test Equipment
Language	English