Lenze i550 Series Project Planning Manual

Ways of commissioning
There are three methods to commission the inverter quickly and easily.
Thanks to Lenze’s engineering philosophy, the high funconality is sll easy to grasp. Parame-
terisaon and set-up are impressive thanks to clear structure and simple dialogues, leading to
the desired outcome quickly and reliably.
•
Keypad
If it’s only a maer of seng a few key parameters such as acceleraon and deceleraon
me, this can be done quickly on the keypad.
•
Smart-Keypad-App for Android or iOS
Ideal for the parameterisaon of simple applicaons such as a conveyor belt.
The Lenze Smart Keypad app can be found in the Google Play Store or in the Apple App Store.
Android
iOS
•
»EASY Starter«
If funcons such as the holding brake control or sequencer need to be set, it’s best to use
the »EASY Starter« engineering tool.
Product informaon
The modular system
Ways of commissioning
22

Lenze i550 Series Specifications

General

Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Overload Capacity	150% for 60 seconds
Control Type	Vector control
Communication Interfaces	CANopen, Modbus, Ethernet, PROFIBUS, PROFINET
Safety	STO (Safe Torque Off)
Frequency Range	0 Hz
Cooling Method	Air cooling
Storage Temperature Range	-25°C to +70°C
Input Voltage Range	3-phase 380...480 V AC -15%/+10%