Lenze i550 Series Project Planning Manual

Motor control types
The following table contains the possible control types with Lenze motors.
Motors V/f characterisc control Sensorless vector control ASM servo control
VFCplus SLVC SC ASM
Three-phase AC motors
MD ● ● ●
MF ● ● ●
mH ● ● ●
m500 ● ● ●
Lenze synchronous servo motors are not suitable for the use with inverters, e. g. the MCS,
MCM or m850 types.
Product informaon
Funcons
Motor control types
24

Lenze i550 Series Specifications

General

Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Overload Capacity	150% for 60 seconds
Control Type	Vector control
Communication Interfaces	CANopen, Modbus, Ethernet, PROFIBUS, PROFINET
Safety	STO (Safe Torque Off)
Frequency Range	0 Hz
Cooling Method	Air cooling
Storage Temperature Range	-25°C to +70°C
Input Voltage Range	3-phase 380...480 V AC -15%/+10%