Lenze i550 Series Project Planning Manual

Cercaon of the integrated safety
The cercaon of the integrated safety is based on these test fundamentals:
•
EN ISO 13849−1: Safety of machinery − safety-related parts of control systems − Part 1
•
EN ISO 13849−2: Safety of machinery − safety-related parts of control systems − Part 2
•
EN 60204−1: Safety of machinery − electrical equipment of machines − Part 1
•
EN 61508, Part 1−7: 1−7: Funconal safety of safety-related electrical/electronic/program-
mable electronic systems
•
EN 61800−3: Electric variable-speed drives − Part 3: EMC requirements including specic
test procedures
•
EN 61800−5−1: Adjustable speed electrical power drive systems − Part 5−1: Safety require-
ments − electrical, thermal and energy
•
EN 61800−5−2: Adjustable speed electrical power drive systems − Part 5−2: Safety require-
ments − funconal safety
•
EN 62061: Safety of machinery − funconal safety of safety-related electrical/electronic/
programmable electronic systems
Declaraons of Conformity and cercates can be found on the internet at
hp://www.Lenze.com
Technical data
Standards and operang condions
Cercaon of the integrated safety
75

Lenze i550 Series Specifications

General

Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Overload Capacity	150% for 60 seconds
Control Type	Vector control
Communication Interfaces	CANopen, Modbus, Ethernet, PROFIBUS, PROFINET
Safety	STO (Safe Torque Off)
Frequency Range	0 Hz
Cooling Method	Air cooling
Storage Temperature Range	-25°C to +70°C
Input Voltage Range	3-phase 380...480 V AC -15%/+10%