Lenze i550 Series Project Planning Manual

Informaon on mechanical installaon
Important notes
Aer being mounted ,the safety module cannot be removed anymore!
Measures for cooling during operaon
•
Ensure unimpeded venlaon of cooling air and outlet of exhaust air.
•
If the cooling air is polluted (u, (conducve) dust, soot, aggressive gases), take adequate
countermeasures.
•
Install lters.
•
Arrange for regular cleaning of the lters.
•
If required, implement a separate air guide.
Informaon on mechanical installaon
Important notes
44

Lenze i550 Series Specifications

General

Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Overload Capacity	150% for 60 seconds
Control Type	Vector control
Communication Interfaces	CANopen, Modbus, Ethernet, PROFIBUS, PROFINET
Safety	STO (Safe Torque Off)
Frequency Range	0 Hz
Cooling Method	Air cooling
Storage Temperature Range	-25°C to +70°C
Input Voltage Range	3-phase 380...480 V AC -15%/+10%