Lenze i550 Series Project Planning Manual

Blanking cover
Protecon and opcs
The blanking cover protects the terminals and provides for uniform opcs if no other module
is plugged on.
Blanking cover
Order code Type VPE
Piece
I5ZAA0000M Protecon against dust
Uniform opcs
4
Setpoint potenometer
For the external selecon of an analog setpoint.
The setpoint selecon (e.g. motor speed) can be manually set via the external potenometer.
The setpoint potenometer is connected to the analog input terminals of the inverter.
The posion is displayed on the scale via the rotary knob.
The components have to be ordered separately.
Setpoint potenometer
Order code Name Type
ERPD0010K0001W
Potenometer
10 kΩ/1 W
ERZ0001 Rotary knob Diameter 36 mm
ERZ0002 Scale Scale 0 … 100 %,
Diameter 62 mm
Memory modules
For series set-up, Lenze oers its customers mulpacked, unwrien memory modules (EPM).
Together with the EPM copier, the EPMs can be duplicated at any place.
A memory module is included in the scope of supply of the inverter.
Memory module
Order code Type VPE
Piece
I0MAPA0000000M
Easily pluggable
Duplicate data set with memory module copier
12
Accessories
Memory modules
243

Lenze i550 Series Specifications

General

Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Overload Capacity	150% for 60 seconds
Control Type	Vector control
Communication Interfaces	CANopen, Modbus, Ethernet, PROFIBUS, PROFINET
Safety	STO (Safe Torque Off)
Frequency Range	0 Hz
Cooling Method	Air cooling
Storage Temperature Range	-25°C to +70°C
Input Voltage Range	3-phase 380...480 V AC -15%/+10%