Safety instrucons
Disregarding the following basic safety measures and safety informaon may lead to severe
personal injury and damage to property!
Observe all specicaons of the corresponding documentaon supplied. This is the precondi-
on for safe and trouble-free operaon and for obtaining the product features specied.
Please observe the specic safety informaon in the other secons!
DANGER!
Electrical voltage
Possible consequences: Death or severe injuries
▶
Any work on the inverter must only be carried out in the deenergised state.
▶
Inverter up to 45 kW: Aer switching o the mains voltage, wait for at least 180 s before
you start working.
▶
Inverter from 55 kW onwards: Aer switching o the mains voltage, wait for at least 600 s
before you start working.
Basic safety instrucons
Personnel
The product must only be used by qualied personnel. IEC 60364 or CENELEC HD 384 dene
the skills of these persons:
•
They are familiar with installing, mounng, commissioning, and operang the product.
•
They have the corresponding qualicaons for their work.
•
They know and can apply all regulaons for the prevenon of accidents, direcves, and
laws applicable at the place of use.
Process engineering
The procedural notes and circuit details described are only proposals. It is up to the user to
check whether they can be adapted to the parcular applicaons. Lenze does not take any
responsibility for the suitability of the procedures and circuit proposals described.
The procedural notes and circuit details described in this document are only proposals. It is up
to the user to check whether they can be adapted to the parcular applicaons. Lenze does
not take any responsibility for the suitability of the procedures and circuit proposals descri-
bed.
Informaon on project planning
Safety instrucons
Basic safety instrucons
33
To Next Page
Loading...
Need help?
General
