Lenze i550 Series Project Planning Manual

Modbus TCP
Typical topologies
Line Tree
M
R
Sn
S2S1
M
SWn
SW2
SW1
M Master SW Switch
S Slave
Bus-related informaon
Name Modbus TCP
Communicaon medium Ethernet 10 Mbps, 100 Mbps, half duplex,
full duplex
Used for... Connecon of the inverter to a Modbus
TCP network
Connecon system RJ45
Status display 2 LEDs
Connecon designaon Port 1: X276
Port 2: X277
POWERLINK
Typical topologies
Line
CN2n
CN22CN21
CN1n
CN12CN11
H2
H1
MN
Mrated Managing Node H Hub
CN Controlled Node
Bus-related informaon
Name Ethernet POWERLINK
Communicaon medium Ethernet 100 Mbps, half duplex
Used for... Connecon of the inverter to a POWER-
LINK network
Connecon system RJ45
Status display 2 LEDs
Connecon designaon IN: X286
OUT: X287
Informaon on electrical installaon
Networks
POWERLINK
65

Lenze i550 Series Specifications

General

Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Overload Capacity	150% for 60 seconds
Control Type	Vector control
Communication Interfaces	CANopen, Modbus, Ethernet, PROFIBUS, PROFINET
Safety	STO (Safe Torque Off)
Frequency Range	0 Hz
Cooling Method	Air cooling
Storage Temperature Range	-25°C to +70°C
Input Voltage Range	3-phase 380...480 V AC -15%/+10%