MMX8x4-HT series – User's Manual 100
Lock the Output
Command and Response
{#><out>•<layer>}
<out2>•<layer>
Example
{#>01 A}
Unlock the Output
Unlocking an output port. The connection on output can be changed.
Command and Response
{+<<out>•<layer>}
<out2>•<layer>
Example
O1 video output port is unlocked.
INFO: The device issues the above response regardless of the previous state of the output (either it was
locked or unlocked).
View Connection State on the Output
response below refers to an MMX8x4-HT420M.
Command and Response #crosspoint #switch
<layer>}
<layer>•<O01>•<O02>
Parameters
Parameter description Parameter values
<layer> Signal type of the layer A: audio layer
V: video layer
AV:
State letters
State Example
Output is locked
M Output is muted M01
U Output is locked and muted U01
Example
I2 video input port is connected to the video output port and I5 audio input port is connected to the audio
View Crosspoint Size
Command and Response
<layer>}
•<layer>
Parameters
Parameter description Parameter values
<number_of_inputs>x<number_of _outputs>
<layer> Signal type of the layer See the previous section
Example
INFO:
independent analog audio outputs).
To Next Page
Loading...
Need help?
General
