MMX8x4-HT series – User's Manual 154
Device 5V Enable
Command and Response
ç <Device5vEnable><enable>
æ <Device5vEnable><enable>
Parameters
Parameter description Parameter values
<Device5vEnable> Device ID Device5vEnable1
Device5vEnable2
Device5vEnable3
Device5vEnable4
<enable>
to the device
true
false
Example
ç
ç
Command and Response
ç <deviceid>
æ <deviceid><status>
Parameters
Parameter description Parameter values
<deviceid> ID of the host PC Device5vOverCurrent1
Device5vOverCurrent2
Device5vOverCurrent3
Device5vOverCurrent4
<status> Indicates if the device
is in overcurrent state
true
false
Example
ç
ç
System Monitoring Commands
SignalPresent property indicates valid signal present on the port.
Command and Response
ç <port>.SignalPresent
æ <port><signal_status>
Example
ç
æ
Parameters
<signal_status> 01F
Connected property indicates that cable or device is connected to the port.
Command and Response
ç <port>.Connected
æ <port><conn_status>
Example
ç
æ
Parameters
<conn_status> 01F
EmbeddedAudioPresent property indicates that embedded audio is present in the video stream.
Command and Response
ç <port>.EmbeddedAudioPresent
æ <port><emb_status>
Example
ç
æ
Parameters
<emb_status> 01F