MMX8x4-HT series – User's Manual 134
Set the Active Timeout
This property is responsible for clearing the ActiveRx, ActiveRxHex, ActiveHash properties after the elapsed
time. Default value is 50ms.
Command and Response
ç <a_timeout>
æ <a_timeout>
Parameters
The <a_timeout> parameter is the active timeout value (ms) between 0 and 255.
Example
ç
æ
Running an Immediate Event Action
DIFFERENCE:
Command and Response
ç <event_nr>
æ <event_nr>
Parameters
The <event_nr> means the number (location) of the linked Event Action without letter 'E'. (There is no need
Example
ç
æ
Enable the IR Port
Command and Response #ir #infrared
ç <ir_port><ir_port_staus>
æ <ir_port><ir_port_staus>
Parameters
Parameter description Parameter values
<ir_port> IR port number D1-D6*
<ir_port_staus> IR port status true: Enable
false: Disable
* The number of the ports depends on the model type. The exact port numbering is listed in Port Numbering
section.
Example
ç
æ
Command and Response
ç <ir_port>.CommandInjectionPort
æ <ir_port>.CommandInjectionPort
Example
ç
æ
To Next Page
Loading...
Need help?
General
