MMX8x4-HT series – User's Manual 117
Set the Emulated EDID
Command and Response #edid
ç <source>:<destination>)
æ
Parameters
Parameter description Parameter values
<source> Source EDID memory place F#: Factory (F1-149)
U#: User (U1- U24* or U1- U27)
D#: Dynamic (D1-D5 or D1-D8*)
<destination> The emulated EDID memory of
the desired input port.
E#: Emulated (E1-E8)
* In MMX8x8-HDMI-4K-A model.
Example
ç
æ mO
Copy an EDID into Another Slot
ATTENTION!
Command and Response
ç
æ
Parameters
Parameter description Parameter values
<source> Source EDID memory place F#: Factory (F1-149)
U#: User (U1- U24* or U1- U27)
D#: Dynamic (D1-D5 or D1-D8*)
<destination> The desired User EDID memory slot U#: User (U1- U24* or U1- U27)
* In MMX8x8-HDMI-4K-A model.
Many copy operations can be performed at the same time by using semicolons (see Example2).
Example1:
ç
æ
Example2:
ç
æ
INFO: I5 and I6
audio ports) and MMX8x8-HDMI-4K-A model (I2, I4, I6 and I8 audio ports).
Audio Mode Setting
Command and Response#analogaudio
ç <in><audio_mode>
æ <in><audio_mode>
Parameters
Parameter
description
Parameter values
<audio_mode> Audio mode 0: HDMI audio passthrough
1: Embed from aux audio
2: De-embed to aux audio
Example
ç
æ
See more details see in Audio Interface section.
Command and Response#mute
ç <in><mute_status>
æ <in><mute_status>
Parameters
If the <mute_status> parameter is true, the port is muted. If the parameter value is false, the port is unmuted
Example
ç
æ
To Next Page
Loading...
Need help?
General
