Lightware MMX8x4-HT Series User Manual


 MMX8x4-HT series – User's Manual 131


Command and Response
ç <serial_port>.CommandInjectionPort
æ <serial_port>.CommandInjectionPort
Example
ç 
æ 
Serial Port Messaging
Sending a Message (ASCII-format) via RS-232
The command is for sending a command message in ASCII-format. This method allows escaping the control
and non-printable characters. For more information see the Escaping section.  #message
Command and Response
ç <message>)
æ 
Example
ç 
æ 

Sending a Text (ASCII-format) via RS-232
The command is for sending a command message in ASCII-format. This method does not allow sending
message with control and non-printable characters.
Command and Response
ç <message>)
æ 
Example
ç 
æ 
The 'open' text is sent out via the P1 serial port.

The command is for sending a command message in Hexadecimal-format. This method does not require
escaping the control characters.
Command and Response
ç <message>)
æ 
Example
ç 
æ 
The '433030' message is sent out via the P1 serial port.
Using Hexadecimal Codes
Hexadecimal codes can be inserted in the ASCII message when using:
sendMessage command: CALL /MEDIA/UART/P1:sendMessage(C00\x0D)
tcpMessage command: CALL /MEDIA/ETHERNET:tcpMessage(C00\x0D)
udpMessage command: CALL /MEDIA/ETHERNET:udpMessage(C00\x0D)
▪ C00: the message.
▪ \x: indicates that the following is a hexadecimal code.
▪ 0D: the hexadecimal code (Carriage Return).





Lightware MMX8x4-HT Series Specifications

General

Brand	Lightware
Model	MMX8x4-HT Series
Category	Matrix Switcher
Language	English