MMX8x4-HT series – User's Manual 128
Command and Response
ç <eq_nr><gain_value>
æ <eq_nr><gain_value>
Parameters
Parameter values
<eq_nr> PEQ1
PEQ2
PEQ3
PEQ4:
<gain_value>
The value is rounded down if necessary to match with the step value. For more
details, see .
Example
ç
æ
For more details, see .
Audio Presets
Save a Preset
Command and Response
ç <ch>:savePreset(<index>,<target_node>,<name>)
æ <ch>:savePreset
Parameters
Parameter
description
Parameter values
<ch> Audio channel MICIN: Microphone Input
LINEIN: Advanced Analog Audio Input
HDMIIN: Embedded Audio Input
LINEOUT: Advanced Analog Audio Output
<index> Memory slot ID 1-8:
<target_node> Audio port
number
I9: Microphone Input (when the <ch> parameter is MICIN)
I10: Advanced Analog Audio Input (when the <ch> parameter is LINEIN)
I11: Embedded Audio Input (when the <ch> parameter is HDMIIN)
O6: Advanced Analog Audio Output (when the <ch> parameter is LINEOUT)
<name> Preset name
hyphen (-), underscore (_), and numbers (0-9) are accepted.
Factory default names: User 1-8
Example
ç
æ
Load a Preset
Command and Response
ç <ch>:loadPreset(<index>,<target_node>)
æ <ch>:loadPreset
Parameters
See the legend in the previous section.
Example
ç
æ
Delete a Preset
Command and Response
ç <ch>:deletePreset(<index>)
æ <ch>:deletePreset
Parameters
See the legend in the Save a Preset section.
Example
ç
æ