Lightware MMX8x4-HT Series User Manual


 MMX8x4-HT series – User's Manual 133



the RECOGNIZER.clear() method is called.
TIPS AND TRICKS:  
follow each other, the action will execute once. (A Condition can be detected in Event Manager if a change
happens. But if the same string is saved into the property after each other, it will not cause a change.)
Command and Response
ç 
æ 

Parameters
The 
Example
ç 
æ 

Command and Response
ç 
æ 

Parameters
The 
Example
ç 
æ 
Clearing the Last Recognized Stored Message
This method deletes all the stored received serial messages.
Command and Response
ç 
æ 
Example
ç 
æ 

temporaryActiveTimeout
property is elapsed, the property is cleared.
TIPS AND TRICKS:  
follow each other, the action will execute every occasion. (A Condition can be detected in Event Manager if
a change happens. In this case, the string is stored in the property and after the ActiveTimeout it will be
cleared. If the same string is saved into the (empty) property that will cause a change.)
Command and Response
ç 
æ pr·
Parameters
The 
Example
ç 
æ 

Command and Response
ç 
æ 

Parameters
The 
Example
ç 
æ 





Lightware MMX8x4-HT Series Specifications

General

Brand	Lightware
Model	MMX8x4-HT Series
Category	Matrix Switcher
Language	English