5. Device Concept MMX8x4-HT series – User's Manual 51
The Event Manager Feature
The Event Manager feature means that the device can sense changes on its ports and is able to react
Event Manager Example
See more information about the settings in the Event Manager.
Event Manager +
DIFFERENCE:
The AND Operator
The practical experience has shown that there is a need to examine two conditions as follows: one condition
exists, and the other is a change that occurs. For example, in a meeting room we have the following situation:
▪ Signal is present on an input port,
▪
If the two Conditions are present at the same time, the ActionConditions into
separate Events, then create a third Event, select the two ConditionsAction.
See the Create or Modify an Event
Event Manager Variables
methods:
▪
▪
▪
▪
processor.
See the Special Tools and Accessories
Condition Trigger
is built, a Condition may trigger numerous Actions. A typical example is when a system is powered on and
could start the whole process.
See the Special Tools and Accessories
Basic IT Security
device:
▪ Cleartext login
▪ IP Port Block
▪ MAC Filtering
The Cleartext Login tool allows setting a password for login, thus, the device will not accept any command
coming from an interface (RS-232, Ethernet, etc…), only the device type and the serial number can be queried
The IP Port Block
command is sent to the device, that is why the TCP port no.10001 shall be blocked manually.
Another level of security is the MAC Filtering
the MAC address which are allowed:
▪ Controlling the device (Send option), or
▪
Below table shows the protection levels of these features.
ATTENTION! Be careful when combining these functions; improper settings may cause malfunction.
Network section.
IP Port Function MAC Filter Cleartext Login IP Port Block
80
-
81
-
6107
-
800x Command injection (RS-232)
-
900x Command injection (IR)
-
10001
-
To Next Page
Loading...
Need help?
General
