Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 94
5.10.5 Display
Brightness – The Falcon-NEO’s screen’s brightness may need to be adjusted, depending
on the user’s preference. To adjust the brightness, use the left or right arrow icons on the
screen. The screen’s brightness will adjust accordingly.
The screen brightness cannot be saved and
loaded as a user profile. Each time the Falcon-
NEO boots, the brightness will be reset to 80%.
Stealth Mode – Stealth mode turns the Falcon-NEO’s screen off, allowing privacy so no
one can see what the Falcon-NEO is doing. When Stealth mode is activated, currently
running operations continue to run.
To turn Stealth mode on, tap ON.
To turn Stealth mode off and restore the Falcon-NEO’s display, tap anywhere on the
screen.
Stealth mode will not have any effect
when using the Graphical User Interface
through a computer’s Internet browser.
5.10.6 Notifications
To access the Notifications tab in the System Settings screen, tap the right navigation
arrow below the Falcon-NEO logo (located on the top-right of the screen):

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English