Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 77
6. The file can then be opened on the computer where it was downloaded to.
Your computer will need to be able to open the
type of file that was downloaded. For example, if
an MP4 file was downloaded, the computer needs
to have software that can open an MP4 file.
5.6.2 Important Notes About Using the File Browser
When using the Falcon-NEO’s File Browser, there are several things to keep in mind:
 Drives connected to the Source positions are write-protected.
 When using the Falcon-NEO’s on-screen GUI, opening a file will not alter the
forensic integrity of the Source drive connected to the Falcon-NEO.
 When using the web interface, opening a file or saving a file to a computer will
not alter the forensic integrity of the Source drive connected to the Falcon-NEO.
 The Falcon-NEO file browser is not able to open every file to preview. When a file
cannot be opened directly on the Falcon-NEO, the file can be saved on a
computer by connecting to the Falcon-NEO’s web interface.
5.7 Logs
The Falcon-NEO keeps logs of all imaging, hash, wipe, format, and push operations.
Logs can be viewed directly on the Falcon-NEO or from a computer’s browser (if the
Falcon-NEO is connected to a network).
When using Drive to File mode (DD, E01, EX01, or DMG), log files are also stored in
the Destination drive in the same folder as the image files.
The log files in the Destination drive are available in PDF, HTML, and XML formats.
In addition to viewing, the logs can be exported to an external USB location such as a USB flash drive.
Logs are exported in PDF, HTML and XML format.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English