Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 70
The Push feature will only push files
created by the Talon Ultimate, Falcon,
Falcon-NEO, and ZXi Forensic.
5.4.2 Settings
(Optional) Tap this icon to enter case info and to set the verify option. There are two
verify settings available:
 Yes – Each file that was copied (on the Destination location) will be verified using
the selected hash method/algorithm selected.
 No – No verification will be made.
5.4.3 Destination
Tap this icon to select the drive or repository where the DD, E01, EX01, or DMG images
will be pushed to (where the files to push will be pushed/copied to). This will only show
drives connected to the Destination ports or repositories set up through the Manage
Repositories screen.
5.5 Task Macro
This operation allows up to five (5) macros that can be set. Each macro can run up to
nine (9) tasks sequentially (one after another). For example, a macro can be set to
perform these tasks in order: Wipe, image, hash, push, then wipe again.
Each of the five macros can be set by tapping on the Macro number as seen in the next picture:

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English