Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 87
 Key: Log File Deletion – A password can be set as an extra layer of protection
when deleting log files. If this password is set, Falcon-NEO will prompt for the
password before any log files can be deleted.
 Key: Local HTTP – A password can be set to lock the local touch screen on the
Falcon-NEO. If this password is set, the Falcon-NEO will prompt for a password
before allowing access to the local touch screen.
 Key: Remote HTTP – A password can be set to lock remote HTTP access
(through a web browser). If this password is set, the Falcon-NEO will prompt for a
password before allowing access through a web browser.
 Key: Config Lock – The Falcon-NEO can be configured to lock out any
configuration changes. When this is enabled, changes to the different types of
operations cannot be made without entering the correct key or password.
Different types of operations can still be started.
For example, when the Falcon-NEO is locked, and it is configured for Drive to File
Imaging mode, the user will be unable to change this mode to Drive to Drive but
can start the Drive to File task.
 User Account: LOGICUBE – Allows the user to change the logicube local
account.
 User Account: IT – Allows the user to change the it local account.
5.10.2.1 Setting Key Passwords
To set a key for Log File Deletion, Local HTTP, Remote HTTP, or
Config Lock, tap one of the buttons. The following screen will appear.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English