Logicube Falcon-NEO User Manual

IMAGING
Logicube Falcon
®
-Neo User’s Manual 47
 L01 Archive – Results will be in Encase L01 archive format.
 LX01 Archive – Results will be in Encase LX01 archive format.
 Directory Tree – All results will be written in a directory tree
format. All files will appear in the same directory structure as
found on the Source drive.
 MFT Report – Results will list deleted files (if present) that can
potentially be restored or recovered.
 Zip Archive – Results will be in a Zip archive format.
In addition to the output format, two additional settings are available
when L01 Archive or LX01 Archive is selected:
 Segment Size – Allows the user to set the output segment size
(file size). Choose from the following segment sizes: 2 GB, 4 GB
(Default), 8 GB, 16 GB, or Whole Disk.
The actual file size may be smaller than
the selected Segment Size if compression
is on. For example, if 4GB segment size is
selected, some files may be less than 4GB.
 Compression – Set compression to either ON or OFF.
4.3.8.3 Filter Settings
The Filter Settings screen shows three selections:
This screen allows the user to set several filters.
Setting an incorrect filter or setting the filter
too narrow may adversely affect results. Each
filter narrows down the results. For example, if
only video files are selected in the Signature
Based File Category filter, it will narrow down
the results of the path filter to only video files
within the results of the first filter.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English