Logicube Falcon-NEO User Manual

GETTING STARTED
Logicube Falcon
®
-Neo User’s Manual 2
 Four Write-blocked source ports include 2 SAS/SATA, 1 USB 3.0, 1 PCIe. Eight Destination
ports include 2 SAS/SATA, 2 SATA, 3 USB 3.0 and 1 PCIe. All destination ports are built-in to the
unit.
 Thunderbolt™/USB 3.1 Gen 2/USB-C I/O card. The card can be installed in any of the Falcon-
NEO’s I/O card ports; two write-protected source I/O ports or 1 destination I/O port. The card
provides the ability to image directly to or from Thunderbolt external drives and enclosures and
also supports imaging to/from USB 3.1 Gen 2 external drives.
 Two 10GbE network ports provide fast network imaging performance. Image to/from a network
repository using CIFS protocol or iSCSI. Connect to a 10GbE NAS as a source and connect to a
network using the 2
nd
10GbE port to minimize bottlenecks. Two ports provide a secure method to
isolate the source network/NAS from the destination NAS/network.
 Networking Feature. Use the Falcon-NEO to image to/from a network repository using CIFS
protocol or iSCSI. Image to an external storage device such as a NAS, using the 10 GbE, USB 3.0 or
SAS/SATA connection.
 Network Capture. Capture network traffic, internet activity and VOIP. Sniff data on a network and
store captured packets on a hard drive connected to Falcon-NEO. Span the Net Traffic to File
images over two or more Destination drives. Captured data is saved to a .pcapng file format.
 Multi-Task. Image simultaneously from multiple sources to multiple destinations including a
network repository. Supports imaging to one location while simultaneously hashing and/or
wiping a second drive. Users can perform up to 5 tasks concurrently. Little or no speed
degradation when imaging from two sources to two destinations.
 Task Macro. Set specific tasks to be performed sequentially; first wipe the destination drive then
hash the source drive then image the source drive. All tasks within the macro will be performed
automatically.
 Parallel Imaging. Perform multiple imaging tasks from the same source drive to multiple
destinations using different imaging formats.
 Targeted Imaging/Logical Imaging shortens acquisition time. Create a logical image by using
pre-set filters, custom filters, file signature filters, and/or keyword search function to select and
acquire only the specific files you need. An MFT report can be generated that contains a potential
deleted file list. Format output to L01, LX01, ZIP or directory tree.
 Partition Imaging. Select and image specific partitions on the source drive.
 Write-Blocked Drive Preview. The file browser feature provides logical access to source or
destination drives connected to Falcon-NEO. Users can view the drive’s partitions and contents
and view text files, jpeg, PDF, XML, HTML files directly on the Falcon-NEO. Preview over a network
via SMB or iSCSI (as an iSCSI target). 3rd party analysis tools can be used with SMB or iSCSI
methods.
 The Falcon-NEO provides built-in support for SAS/SATA/USB3/PCIe storage devices.
Thunderbolt™ external storage solutions are supported with an optional I/O card. PCIe M.2,
including NVMe drives, PCIe cards, IDE drives and flash drives are supported with optional
adapters. SCSI and FireWire® devices are supported with optional modules that connect to the
PCIe ports on Falcon-NEO. mSATA, micro SATA and eSATA drives are supported with adapters
included with the unit.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English