Logicube Falcon-NEO User Manual

TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 57
network the Falcon-NEO is connected to, it will open a web browser to the Falcon-NEO’s
IP address to access the web interface.
 Advanced Drive Statistics – Shows raw S.M.A.R.T. data (if supported) on any drive
connected to the Falcon-NEO.
 Network Interface Stats – Shows statistics and information on the Network Interface
 Debug Logs – Logicube Support may request to export debug log files to a USB flash
drive.
 Help – Displays a QR code that links to the user’s manual online.
9. MANAGE REPOSITORIES – Allows the user to add a network location as a repository that can be
used as a Destination for imaging or pushing images. This will display three tabs that include:
 Add/Remove – Allows the user to add, remove, or edit networked repositories.
 iSCSI – Allows the user to set ISCSI protocol settings.
 Configuration – Allows the user to change the default format option for drives that are
not formatted by the Falcon-NEO.
10. SYSTEM SETTINGS – This mode allows changes to the system settings on the Falcon-NEO which
include the following:
 Profiles – Allows the user to create, save, apply, or delete user profiles/configurations.
 Passwords – Allows the user to set a password to lock the Falcon-NEO from any
configuration changes.
 Encryption – Sets the cipher mode (VCRPYT, TC-XTS, CBC, or ECB), Cipher, IV Generation,
and the encryption password.
 Language/Time Zone – Sets the language on the Falcon-NEO’s menu and change the
system’s Time Zone.
 Display – Sets the Falcon-NEO’s display/screen brightness and enable/disable Stealth
Mode
 Notification – Sets audible beeps/notifications for when a task successfully completes or
if an error appears.
11. NETWORK SETTINGS – Allows the editing of various network configurations. Two tabs are
available:
 Interfaces – Edit TCP/IP and enable or disable certain network services.
 HTTP Proxy – Set proxy settings (if required by the user’s network).
12. SOFTWARE UPDATES – Perform software and firmware updates on the Falcon-NEO. Software
can be updated over an internet connection (from network) or from a USB flash drive. Two tabs
will be displayed:
 Software Updates – This is the screen where users can check for new software and
update or reload the software.
 Firmware Update – Firmware for the Falcon-NEO (if available) can be updated on this
screen.

Logicube Falcon-NEO Specifications

General

Brand	Logicube
Model	Falcon-NEO
Category	Laboratory Equipment
Language	English