TYPES OF OPERATIONS
Logicube Falcon
®
-Neo User’s Manual 73
2. Next, set the Imaging task. Select Drive to Drive as the Mode. Select SAS_S1
as the Source. Change the settings as needed. Select SAS_D1 as the
Destination. Do not start this task.
3. Choose Task Macro from the list of operations on the left side.
4. Tap the Tasks icon to select the different tasks for the macro.
5. Tap the field next to Operation 1 to set the first operation. Since the first task
to be run is the Wipe task, select Wipe 1 then tap OK.
6. Tap the field next to Operation 2 to set the second operation. Since the
second task to be run is the Drive to Drive Imaging task, select Image 1 then
tap OK.
7. The screen should now show Wipe 1, Image 1 as the Tasks for Macro 1.
To Next Page
Loading...
Need help?
General
