Mindray ME8 Operator's Manual

Operator’s Manual 6 - 1
6 Image Acquisition
WARNING
• The images displayed in this system are only reference for diagnosis.
Mindray is not responsible for the correctness of diagnostic results.
• In Dual-B imaging mode, the measurement results of the merged image
may be inaccurate. Therefore, the results are provided for reference only,
not for confirming a diagnosis.
TIP:
Operations for switching between different image modes and optimizing images, see “2.13 Basic
Operations”.
6.1 B Mode
B mode is the basic imaging mode that displays real-time views of anatomical tissues and organs.
6.1.1 B-mode Image Scanning
Press <B> on the control panel to enter B mode.
If the system is in other imaging mode, press <B> to return B mode.
Adjust parameters to optimize the image.
6.1.2 B-mode Image Parameters
Image Quality
Used for switching B/THI and adjusting the frequency. The real-time value of frequency is
displayed in the image parameter area, and if harmonic frequency is used, “F H” is displayed as
harmonic frequency value.
The system provides a THI function using harmonics of echoes to optimize the image. Harmonic
imaging enhances near field resolution and reduces low-frequency and large amplitude noise, so as
to improve small parts imaging.
Please select the frequency according to the detection depth and current tissue features.
Gain
To adjust the gain of the whole receiving information in B mode. The real-time gain value is
displayed in the image parameter area.
Depth
This function is used to adjust the display depth of sampling, the real-time value of which is
displayed in the image parameter area.

Mindray ME8 Specifications

General

Brand	Mindray
Model	ME8
Category	Diagnostic Equipment
Language	English