14 Patient Data Management
Operator’s Manual 14 - 7
14.4 Recycle bin
The recycle bin is used to store deleted patient data, exam data and images.
The system supports recovery of these data from the recycle bin.
Click at the lower right corner of the screen (when the button is gray, the operation is
unavailable) to enter the Patient Recycle Bin screen.
To recover the deleted patient data
If the capacity of the recycle bin exceeds 200. The system reminds the user to clean. Follow the
procedures below to clean the recycle bin.
Perform the following procedure:
1. Select items to be recovered in the list.
2. Select operations:
– Click [Restore Items] to restore the item back to iStation.
– Click [Delete] to delete the item permanently, and the item can never be restored again;
– Click [Restore All Items] to restore all the items back to iStation;
– Click [Empty Recycle Bin] to empty the recycle bin and all items can never be restored
again.
– Click [Exit] to exit the recycle bin.
To set maximum number of days or deleted data to be kept in the recycle bin
The patient exams which exceed the preset maximum will be deleted and unrecoverable, it is
recommended to perform patient data backup before enabling this function to avoid data loss.
Perform the following procedure:
1. Input the desired number besides “Maximum number of days to be kept”.
If the input box is left blank, the feature will not be enabled.
Only the whole number ranging from 1 to 365 can be input.
2. Click [Modify].
Annotation an
exam
Select an exam and click [Annotation Exam] to add annotation.
In the popped-up screen, you can also review the history annotations for the
selected exam.
Item Description
To Next Page
Loading...
Need help?
General
