Mindray ME8 Operator's Manual

8 - 2 Operator’s Manual
8 Strain Elastography
8.2 Image Parameters
Smooth
Adjust the smooth feature of the Elasto image.
Opacity
Adjust the opacity feature of the Elasto image.
Invert
Invert the E color bar and therefore invert the colors of benign and malignant tissue.
Display Format
Adjust the display format of ultrasound image and the Elasto image.
Tap [H 1:1], [V 1:1], [Full] on the touch screen to adjust.
The system provides 3 types of display format:
• H 1:1: Right and left display (the real-time ultrasound image appears on the left, and the elasto
image appears on the right);
• V 1:1: Up down display (the elasto image appears above, and the real-time ultrasound image
appears below).
• Full: The elasto image only displayed.
Map
Select different maps for observation.
Strain mode
Affect the display effect of adjusting dynamic range.
Dynamic Range
Adjust contrast resolution of an image.
The real-time dynamic range value is displayed on the image parameter area in the upper left corner
of the screen.
E Sensitivity
Increase the image palpability.
Strain Scale
Adjust the bar height of the pressure hint curve to keep the average height of the hint bar on proper
position.
Map Position
Adjust the up/down position of the map.
8.3 Mass Measurement
Press <Measure> to enter measurement status.
You can measure shell thick, strain ratio, strain-hist, etc.
For details, see Advanced Volume.

Mindray ME8 Specifications

General

Brand	Mindray
Model	ME8
Category	Diagnostic Equipment
Language	English