Mindray ME8 Operator's Manual

Operator’s Manual E - 1
E iScanHelper
By providing the referential information, such as, the ultrasonic image, the anatomic graphic,
scanning pictures/other scanning tips or diagnosis comments, the system helps the doctors to
operate the scanning by iScanHelper. Furthermore, it is a good platform for the self-learning and
training of ultrasound scanning technique for doctors. The system also plays a role in the assistant
software system in fulfilling training and education.
NOTE:
THIS “iScanHelper” IS FOR REFERENCE OR TUTORIAL PURPOSES ONLY, AND THE
MANUFACTURER WILL NOT BE LIABLE FOR DAMAGES AND/OR OTHER
UNDESIRABLE CONSEQUENCE IN ANY KIND THAT MAY OCCUR TO THE PATIENT OR
THE USERS BY USING THE SOFTWARE.
TIP:
iScanHelper feature is available under abdominal, gynecological, urological, obstetrical, small parts
and nerve block area.
E.1 Use iScanHelper for Reference
Perform the following procedure:
1. Perform ordinary scanning procedure.
2. Press the user-defined key for “iScanHelper” to enter iScanHelper status.
3. Use the trackball/trackpad to move the cursor onto the target view name in the view selecting
box and then press <Set>.
4. Perform scanning according to information displayed on the help information area.
5. Press the user-defined key again to exit.
E.2 Use iScanHelper for Learning or Training
Perform the following procedure:
1. Switch to the exam modes that support iScanHelper.
2. Press the user-defined key for “iScanHelper” to enter iScanHelper status.
3. Learn and practice views by system defaulted sequence according to the information displayed
on help information area; or select unfamiliar views to practice.
4. Press the user-defined key again to exit iScanHelper.

Mindray ME8 Specifications

General

Brand	Mindray
Model	ME8
Category	Diagnostic Equipment
Language	English