Mindray ME8 Operator's Manual

4 Setup
Operator’s Manual 4 - 35
Turn on Wi-Fi function
1. Select [Network Settings] page in Network Preset screen.
2. Confirm the Wi-Fi is enabled: [Disable Wifi] appears on the screen.
Turn on hosted network function
Reserved.
4.8.2 iStorage Preset
You can send exam data or images to the iStorage server and perform analysis using UltraAssist.
For details about this feature, see the UltraAssist manual.
Add an iStorage service
Perform the following procedure:
Item Description
Status • No driver: click [SetupDriver] to enter the “TAP-Windows 9.21.2
Setup” interface, and do as instructed.
• Ready: the VPN is ready for use.
• Advance: VPN Advance Configuration
• Connected: VPN is successfully connected.
• Disconnected: VPN is disconnected.
• Error: error connection.
Server IP /
Group /
User Name /
Password /
Hide characters The password is displayed as *.
Connect/ Disconnect Connect or disconnect VPN.
Advance Enters the “VPN Advance Config” interface.
• Reset: if the system does not respond after you click [Config], click
[Reset].
• Config: enters the “OpenConnect-GUI VPN client” interface. For
details about the settings, please refer to the TAP manual.
NOTE:
After exiting the “VPN Advance Config” interface, you need to
reboot the system; otherwise, you cannot connect VPN normally.
Close Close the “VPN Advance Config” interface.
Item Description
Service Name The name of the iStorage service.
IP Address IP address of the iStorage service device.
Port Port for transmitting.
Charset Set the character set.

Mindray ME8 Specifications

General

Brand	Mindray
Model	ME8
Category	Diagnostic Equipment
Language	English